June 25, 2010

Plastic models are available in many shapes plus forms. Some basic painting techniques and a solid amount of really all that’s required in order to rework them into gorgeous works of art. The techniques are used by everyone from beginners to professionals and will greatly enhance the general products of your hobby.  

The the one basic technique for painting is a base coat. This should be an even layer, or multiple layers, applied to all or any exposed areas that you just wish to be visible. Gently put the tip of your shop brush to the paint, allowing the tip to be coated but not too much that it drops form. Paint 1 color at a point on each of the surfaces of the model that you simply would like to be a solid color. It’s critical to leave area in the recesses for the following step, but don’t fret if you get a bit of paint into the recesses as they’ll be covered by the wash.  Discover more about scale model police car here.

Once your base coat has dried, you can apply an ink wash or thinned black paint to the model. Mix your paint as 2 parts] water to 1 part paint for a skinny wash, or equal amounts for a thicker, darker wash. A darker wash will lend a additional shadowy quality to the miniature, but may obscure minute details. Once you have your inks or thinned paint, wet your brush in them plus brush each one of the base-coated areas of your model, permitting the wash to run between the raised areas plus into the recesses. Like base coating, multiple washes may be needed to achieve the extent of detail you desire.  

The final basic technique for model painting is dry brushing. For this, you will desire to use an older brush or one that you do not mind the bristles becoming worn. Dry brushing is terribly troublesome on brushes but can be used to obtain a great highlighted effect. Cover the end bristles of your dry brush with a tiny amount of a lighter colored paint than your base coat. Gently squeeze the brush together with a paper towel or spin it on the towel until no added paint visibly comes off. Enough paint can stay on the brush that you are able to now flick it in can pick up the flakes of paint which remain on the brush permitting the lighter color to appear as if light were shining on a 3 dimensional figure.